Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Why San Angelo Homeowners Choose Lennox Air Duct Cleaning
We provide independent Lennox air duct cleaning, coil cleaning and duct repair in San Angelo. We’re not affiliated with Lennox and not authorized by them. What sets our Lennox work apart is that we know how these systems are built and how they get dirty in this climate: the cabinet insulation, the coil layout, the plenum collars, and the return chases that collect West Texas dust.
San Angelo sits on the edge of West Texas oil country and the Concho Valley. Caliche dust, cotton-field grit and spring windstorms push fine particulate into return grilles and ductwork in a way greener Texas cities never see. Duct work here is less about moisture and mold and more about dry mineral dust and dust-storm silt settling into return chases and plenum runs. Homes near the airport and out toward the mesquite rangeland get hit hardest.
Our technicians have up to 13 years of experience, and we use professional-grade equipment from Rotobrush and Nikro. We clean it, and if it’s broken, we fix it. Call (844) 761-5306 for a free estimate.
Why Trust Duct Cleaning San Angelo for Your Lennox Air Duct Cleaning?
Our technicians have pulled, cleaned and repaired ductwork on Lennox residential platforms, including the Merit Series air handlers with matching condensers, the Elite Series variable-speed air handlers, and the Dave Lennox Signature Collection variable-capacity systems. We’ve also worked around the HC and ME Series evaporator coils and the plenum cabinets that sit above them. That familiarity matters because Lennox cabinet and plenum layouts collect dirt in specific ways, and a technician who doesn’t know them can miss the worst of it.
We use OEM Lennox components when a coil, blower or cabinet part is cracked or has failed. For duct repairs, we use quality aftermarket flex, mastic and insulation where fit and performance are equivalent. These parts fit the equipment and hold up under San Angelo’s attic heat.
We’re an independent service provider. We’re not a Lennox dealer, not factory-trained or certified by Lennox, and we have no warranty relationship with the manufacturer. That independence means our recommendations are based on what the equipment actually needs, not on a brand loyalty agreement.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Common Lennox Air Duct Cleaning Problems We Fix in San Angelo
- Fiberglass cabinet liner shedding into the airstream. Older Lennox Merit air handlers have fiberglass-lined internal cabinet insulation. Over time that liner breaks down and sheds fibers into the airstream, coating the coil and loading the return duct with debris. The fix is to clean the system, reline or seal the cabinet, and confirm the airstream is clear.
- Evaporator coil face loading in horizontal and upflow cabinets. Lennox horizontal and upflow cabinets collect lint and dust on the coil face. Even with clean filters, the coil matts up, and you get frosted coils and weak airflow. This is one of the most common reasons a Lennox system runs but doesn’t cool well in San Angelo summers.
- Loose or disconnected flex duct at plenum collars and takeoffs. Vibration and attic heat work flex duct connections loose. When flex pulls away from a Lennox plenum collar or takeoff, air leaks into the attic instead of into the rooms. We reconnect and mastic-seal these joints.
- Cracked mastic at plenum and cabinet seams. Sheet-metal plenum and cabinet seams in Lennox systems are sealed with mastic that dries and cracks over time. Once it fails, the return pulls dust and hot attic air into the system. Re-sealing those seams is part of a proper duct repair.
- Return chases packed with dry caliche silt. San Angelo’s semi-arid climate means single-digit humidity much of the year and hot summers near 100°F. Ducts here collect dry caliche and soil dust rather than moisture-driven mold. After a spring dust storm, return grilles across older neighborhoods clog with fine reddish-tan silt within days. Our Rotobrush agitation and Nikro HEPA extraction pull that material out rather than pushing it further in.
Lennox Parts & Our Repair-vs-Replace Approach
When a Lennox part is cracked or has failed, we use OEM components: coil, blower and cabinet parts that fit the equipment as built. For duct repairs, we use quality aftermarket flex, mastic and insulation where fit and performance are equivalent to the original. We don’t stock OEM or genuine Lennox parts, and we don’t claim to. We source what the job needs.
The repair-versus-replace call is where honesty matters. When an evaporator coil is heavily fouled but still sound, cleaning and sealing is the right first move. Replacement only makes sense when corrosion or refrigerant leaks make cleaning pointless. We’ll tell you which situation you’re in before any work starts, and the price is set per job by a written estimate.
If your Lennox system has lost airflow or your coil is matted with dust, call (844) 761-5306 for a free estimate.
Our Lennox Service Process – Step by Step
- 1
Inspect and diagnose. We check the return side, coil face, cabinet liner, plenum seams and flex connections, then test airflow and confirm where the dust is coming from.
- 2
Clean and repair. Rotobrush rotary brush agitation inside the duct walls, Nikro HEPA extraction for containment-level removal, and Abatement Technologies air scrubbers running throughout to keep contaminants out of your living space. Duct repairs, coil cleaning and cabinet relining happen at this stage.
- 3
Test and verify. After cleaning and repair, we recheck airflow and confirm the coil face and return are clear. You get before-and-after photos of your own ducts, so you can see what changed.
- 4
Warranty-safe close-out. We note what was done and what parts were used. Nothing we do involves dismantling or modifying the equipment in a way that puts your Lennox warranty at risk.
See the difference
Before
After
Before
After
Before
AfterLennox Products We Service & Install in San Angelo
We service and install the Lennox residential products common to San Angelo homes: Merit Series air handlers and matching condensers, Elite Series variable-speed air handlers, the Dave Lennox Signature Collection variable-capacity systems, and the HC and ME Series evaporator coils and plenum cabinets that pair with them. Whether you have a variable-speed system or a standard air handler, the service approach is the same: clean what’s dirty, seal what’s leaking, and verify airflow before we call it done. If a part has failed, we install a replacement that fits the equipment.
We Also Service These Brands
Lennox is our focus here, but we’re not limited to it. We also clean and repair ductwork serving Trane and Carrier systems. The cabinet layouts and plenum designs differ between brands, and that knowledge matters when a job turns out to have a different system than expected. Multi-brand capability means we can handle a San Angelo home with mixed equipment without sending you elsewhere.
FAQs – Lennox Air Duct Cleaning Service in San Angelo
No. We’re an independent service provider. We’re not affiliated with, authorized by or certified by Lennox, and we have no warranty relationship with the manufacturer. We work on Lennox equipment because we know it, not because Lennox endorsed us. Call (844) 761-5306 to book an independent Lennox service in San Angelo.
Yes. When a Lennox coil, blower or cabinet part is cracked or failed, we use OEM components that fit the equipment. For duct repairs, we use quality aftermarket flex, mastic and insulation where fit and performance are equivalent. We don’t stock OEM or genuine Lennox parts; we source what the job needs. Estimates are free and the written estimate sets the price.
Most Lennox duct cleaning and coil cleaning jobs take a few hours, depending on the size of the system and how much dust has accumulated. Jobs that include cabinet relining or significant duct repair take longer. We answer 24/7 and offer fast dispatch from 7am to 7pm, Sunday through Friday. Call (844) 761-5306 and we’ll book you into the next opening.
We service and repair ductwork serving Lennox Merit Series air handlers and matching condensers, Elite Series variable-speed air handlers, Dave Lennox Signature Collection variable-capacity systems, and HC and ME Series evaporator coils and plenum cabinets. The service approach is the same across platforms: clean, seal, verify, and fix what’s broken. Call (844) 761-5306 with your equipment details and we’ll confirm coverage.
No. Cleaning ducts and sealing plenum seams doesn’t void a Lennox warranty. We don’t dismantle or modify equipment, and we don’t do anything that would compromise the manufacturer’s coverage. If a part has failed and needs replacement, we install a component that fits the equipment. Call (844) 761-5306 for a free estimate and we’ll walk through exactly what’s involved.
The price is set per job by a written estimate, so there’s no per-vent pricing and no low teaser figure that grows once we’re on site. One flat price per system, agreed before work starts, with before-and-after photos of your own ducts so you can see what was done. The estimate is free. Call (844) 761-5306 for an exact quote.
Book Your Lennox Service in San Angelo, TX
Whether your Lennox system is running weak, your return grilles are full of caliche silt, or you’re not sure whether the ductwork or the coil is to blame, we’ll diagnose it and tell you honestly. Call (844) 761-5306 for a free estimate. We answer 24/7. Fast dispatch, 7am-7pm, Sunday through Friday, closed Saturday. One flat price per system, agreed before work starts. We clean it, and if it’s broken, we fix it.
Written by the team at Duct Cleaning San Angelo.